火焰原子吸收光谱法测定天然气转化催化剂中的氧化钾

建立火焰原子吸收光谱法测定天然气转化催化剂中氧化钾的分析方法。该方法将催化剂样品和助溶剂四硼酸锂熔融后再用盐酸溶解定容,采用火焰原子吸收光谱仪对样品溶液进行测定。在优化的实验条件下,钾离子的质量浓度在0.05~0.50 mg/L范围内与吸光度呈良好线性关系,相关系数为0.9995。钾的方法检出限为0.001 mg/L,定量限为0.01 mg/L,测定结果的相对标准偏差为2.6%~4.3%(n=6),样品加标回收率为97.8%~102.3%。与HG/T 3543-2014中的酸溶制样法相比,该方法能够将催化剂样品中的难溶钾盐溶出,分析结果准确度更高,可用于天然气转化催化剂中氧化钾含量的测定。     

Ultra-stable Ni catalysts for methane reforming by carbon dioxide

Methane reforming by carbon dioxide has been studied over ultra-stable Ni catalysts. The catalyst was characterized by XRD, IR and TEM and temperature programmed hydrogenation. The nickel–magnesia solid solution catalyst containing low nickel has shown excellent stability (>3000 h) and no carbon deposition in the methane reforming by carbon dioxide. It was also found that the small nickel metal particle interaction with support surface is effective for the inhibition of carbon formation.     

甲烷直接氧化制甲醇Ⅲ．反应气吹扫催化膜反应器（RSCMR）

用溶胶－凝胶法制备了“ＳｉＯ＿２／陶瓷”非对称无机膜，并用该膜制备了反应气吹扫催化膜反应器（ＲＳＣＭＲ）装置。在ＲＳＣＭＲ上考察了甲烷一步催化氧化制甲醇反应。结果表明，在研究的范围内，增加氧气或甲烷的浓度和吹扫气的流速（即总的反应气流量）有利于提高甲醇的收率；甲醇在反应条件下的热不稳定性是影响目标反应选择性的重要原因。ＲＳＣＭＲ较膜反应器（ＣＭＲ）系统能更有效地抑制甲醇的热分解，因而可得到较ＣＭＲ更高的甲醇收率。当反应温度为７００℃时，甲醇的收率在ＣＭＲ中为０．５ｇ／ｍ￣２ｈ，在ＲＳＣＭＲ中可达０．９ｇ／ｍ￣２ｈ。     

Thermodynamics of the conversion of aqueous glucose to fructose

The thermodynamics of the conversion of aqueous glucose to fructose has been investigated using both heat conduction microcalorimetry and high pressure liquid chromatography (HPLC). The reaction was carried out in both aqueous Tris/HCl buffer and in aqueous phosphate buffer in the pH range 7–8 using the enzyme glucose isomerase and the cofactors CoCl₂ and MgSO₄. The temperature range over which this reaction was investigated was 298.15–358.15 K. We have found that the enthalpy of reaction is independent of pH over the range investigated. A combined analysis of both the HPLC and microcalorimetric data leads to the following results at 298 15 K:ΔG° = 349 ± 53 J mol^-1, ΔH° = 2.78 ± 0.20 kJ mol^-1, and ΔC _p ^° = 76 ± 30 J mol^-1 K^-1. The stated uncertainties are based upon an analysis of both the random and systematic errors inherent in the measurements. Comparisons are made with literature data. The percent conversion of glucose to fructose has been calculated for the temperature range 300–373.15 K.     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

含钒杂多酸催化发烟硫酸中甲烷液相部分氧化反应

 以H5PV2Mo10O40 为催化剂,在发烟硫酸中进行了甲烷液相部分氧化,考察了催化剂用量、反应温度、反应时间和发烟硫酸浓度等工艺条件对反应收率的影响. 甲烷在反应中首先转化为硫酸甲酯,硫酸甲酯随后水解为甲醇. 对于甲烷液相部分氧化反应,发烟硫酸中游离的SO3是非常重要的影响因素. 在工艺条件为催化剂用量7.0 mmol, 反应温度473 K, 反应压力3.5 MPa, 反应时间3 h和发烟硫酸中SO3含量50%时,甲烷转化率可达48.5%, 目的产物甲醇收率为41.5%.     

Conversion ofn-hexane over Pt?Sn/γ-Al2O3 catalyst

Conversion ofn-hexane has been applied as a test reaction to study differences between the series of Pt−Sn/γ-Al₂O₃ catalysts obtainedvia different methods of preparation. Preliminary results of catalytic experiments have been compared with some changes occurring on the catalysts surfaces as the results of the preparation technique applied. It has been found that catalysts with the second metal (Sn) introduced to the support by the coprecipitation technique were much more stable in comparison to the catalysts where the tin component has been added by the impregnation method, however, we have not observed large differences in catalytic activity.     

NiO/La2O3催化剂上甲烷催化部分氧化制合成气的研究

采用浸渍法制备了一系列不同N i含量的N iO/La2O3催化剂,并利用XRD、BET对催化剂结构进行了表征,采用常压下固定床石英管反应器考察了催化剂对甲烷部分氧化制合成气的反应性能和催化剂的稳定性,其甲烷转化率与反应温度、N i含量以及空速有关.结果表明,N i含量为30%的N iO/La2O3催化剂具有良好的催化活性,800℃时甲烷的转化率为88%,CO选择性可达83%,100 h的连续测试显示N iO/La2O3具有良好的稳定性.     

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

The performance of uspported and unsupported molybdenum carbide for the partial oxidation of methane (POM) to syngas was investgated.An evaluation of the catalysts indicates that bulk molybdenum carbied has a higher methane conversion during the initial stage but a lower selectivity to CO and H2/CO ratio in the products.The rapid deactivation of the catalyst is also a significant problem.However,the supported molybdenum carbide catalyst shows a much higher methane conversion,increased selectivity and significantly improved catalytic stability.The characterization by XRD and BET specific area measurements depict an improved dispersion of molybdenum carbide when using alumina as a carrier.The bulk or the supported molybdenum carbide exists in the β-Mo2C phase,while it is transformed into molybdenum dioxide postcatalysis which is an improtant cause of molybdenum carbide deactivation.     

甲烷氧化偶联Na2WO4-Mn/SiO2催化剂热效应的研究

采用固定床微型反应装置,研究了甲烷氧化偶联反应过程中Na2WO4-Mn/S iO2催化剂床层的热效应和催化性能的关系,考察了反应炉温、CH4/O2比和反应气体空速对催化剂床层热点分布的影响.研究结果表明,甲烷氧化偶联催化剂床层的热效应强烈依赖于反应条件.反应炉温越高,CH4/O2比越低,反应气体空速越大,催化剂床层的热点温度越高.结合催化性能和热效应关系的研究,为优化甲烷氧化偶联的反应操作提供了实验依据.